You are here:
Help Contents
>
Embossers and Embossing
>
Embossers - Master List
>
Control File listing for: Nippon Super Gemini (small spacing)
Control file listing for: Nippon Super Gemini (small spacing)
# *** Embosser definition unchanged since 03/31/2011
# Because of the small spacing. interpoint is not possible. Use (Nippon Telesoft Gemini) for interpoint.
# Using Proprietary driving sequences. similar to 55
# Proprietary control sequences used for this embosser
# Warning -- page size maximum needs to be compiled into driver source code
# Notice the use of
Customize
for small line spacing
#
Customize
= 2 -- small spacing 235/900 inches/line
#
Customize
= 3 -- middle spacing 274/900 inches/line
#
Customize
= 4 -- large spacing 314/900 inches/line (command not needed. large is the default)
#
Customize
= 5 -- unsure if this is a valid spacing
#
Customize
= 6 -- ST spacing. exact spacing depends on page size
Driver
= "Emb_Gemini_EmbosserDriver"
SubModel = 1
StartLeftMargin
= 0
Interline
Customize
= 2
MaximumCells
= 32
MaximumLines
= 24
NarrowWarning
NoLeftMargin
NoRightMargin
NoTopMargin
YesUSB
HelpPage
= "Nippon_Super_Gemini_(small_spacing).htm"
Form
"
10_n
" = 85 x 100 ;
SinglePage
;
BrailleOnly
= 32 x 22 ; 32 x 22 ;
Interline
= 32 x 22 ; 32 x 22
Form
"
11_n
" = 85 x 110 ;
SinglePage
;
BrailleOnly
= 32 x 24 ; 32 x 24 ;
Interline
= 32 x 24 ; 32 x 24
Form
"
11_gem
" = 100 x 110 ;
SinglePage
;
BrailleOnly
= 32 x 24 ; 32 x 24 ;
Interline
= 32 x 24 ; 32 x 24
Form
"
12_n
" = 85 x 120 ;
SinglePage
;
BrailleOnly
= 32 x 26 ; 32 x 26 ;
Interline
= 32 x 26 ; 32 x 26