Control file listing for: Enabling Juliet 120

• # *** Embosser definition unchanged since 06/30/2016
• # using escape sequence. using Index Driver with version 4 software
• # esc D with parameters specified in InitSequence setting
• CanDoInterpoint
• VPGraphics
• Index20Graphics
• IndexMulti
• Index16Graphics
• IndexPageInch
• ControlZ
• MaximumCells = 48
• MaximumLines = 27
• EndofPage = 1
• YesUSB
• NoParallel
• IndexZfold
• Driver = "Emb_IndexEmbosserDriver"
• WindowsDriverName = "ETC Juliet 120"
• StartLeftMargin = 0
• # InitSequence as recommended for V4 firmware 1.3.4
• InitSequence="BT0.TD0.PN0.DP.LS50.TM.BI.CH.LP.MC"
• HelpPage = "Juliet_120.htm"
• Form "A3" = 117 x 165 ; SinglePage ; 49 x 41 ; 47 x 40
• Form "10_n" = 85 x 100 ; SinglePage ; 35 x 23 ; 32 x 24
• Form "11_n" = 85 x 110 ; SinglePage ; 35 x 27 ; 32 x 25
• Form "A4" = 83 x 117 ; SinglePage ; 35 x 29 ; 30 x 27
• Form "A4_ex" = 98 x 117 ; SinglePage ; 41 x 29 ; 41 x 27
• Form "11_w" = 115 x 110 ; SinglePage ; 47 x 27 ; 40 x 25
• Form "12_n" = 85 x 120 ; SinglePage ; 35 x 29 ; 32 x 28
• Form "12_w" = 115 x 120 ; SinglePage ; 47 x 29 ; 40 x 28
• Form "13_n" = 85 x 130 ; SinglePage ; 35 x 32 ; 32 x 30
• Form "13_w" = 115 x 130 ; SinglePage ; 47 x 32 ; 40 x 30
• Form "10_n_side" = 100 x 85 ; SinglePage ; 40 x 21 ; 38 x 20
• Form "11_n_side" = 110 x 85 ; SinglePage ; 44 x 21 ; 42 x 20
• Form "11_w_side" = 110 x 115 ; SinglePage ; 44 x 28 ; 42 x 26