If your activation request failed or you are uncertain about the current state of your program, you can run the diagnostic tests to help figure out the source of a problem. It is not generally informative to run diagnostics unless you have at least tried to activate your software or you were previously activated, but it never hurts.
Each activation is closely tied to your specific computer. Ergo, some changes on your computer can interfere with its activation. An example is a hardware change such as installing a new mother board or swapping out a failed disk. Other issues may be less obvious, but sharing the diagnostic results with Duxbury Customer Support can help you resolve them. You can use the Send Email button on the Diagnostics page as a convenient means to contact Duxbury.
The Top Section identifies what we are trying to test.
Product / Version: identify the specific Duxbury program you are running.
Duxbury License Text: displays the license that you entered at installation time or afterward. It also shows what the wizard presumes about whether your license is registered.
Activation Computer: Normally this field shows the computer name you supplied when you activated your Duxbury program. This applies whether your computer is a single-user system activated independently or whether it is the network host for a multi-user license. If your computer is activated as a client of a network server, however, this field shows the name of the server computer and possibly other information about that connection.
This section shows the results of all the diagnostic tests that were run. If a test was not run, it is usually because it does not apply, and its result field displays N/A.
License Check: shows whether the license supplied is a valid license for this Duxbury product.
Files Check: looks for all your activation related files. When all the key files are present, you see the result OK.
Installation Check: indicates whether the installer completed a critical step for activating your program. If you see Not Installed you can try uninstalling and reinstalling your software. If it fails again, your installation process is not working.
Shared Activation Connection: This test applies when your computer is activated from a network license server on your local area network (LAN). For that case, it shows the status of your activation connection. Problems with the Shared Activation Connection are best handled by your local IT staff. On the main page of the activation wizard, there is a function to Connect to the Network License Server. If yours is a client computer and your connection has failed, you can run that function again.
Computer Hardware Match: checks that your product is running on the same computer hardware where you installed it. The most common results are: OK or Mismatch, but other technical messages may also appear. If you have replaced your hard disk or updated your BIOS without deactivating first, then this test will almost certainly fail. You can probably fix a Hardware Mismatch by uninstalling your program, then reinstalling and reactivating. If the Hardware Mismatch persists, contact Duxbury to resolve the problem.
When the Shared Activation Connection test above indicates a remote activation, the Hardware Match test is not run.
Activation Type: What you want to see from this test is the word "Normal" plus a hex code in square brackets. In some cases that code can help Duxbury Support to resolve your issue.
Activation State: shows whether or not your program is activated, according to the following chart.
| Displayed Value | Meaning |
|---|---|
| ACTIVATED | OK. Your program should run normally. |
| EXPIRED | Your evaluation license has expired (DBT only). |
| BAD | Your activation has become internally corrupted. |
| NOT ACTIVATED | Your program is not yet (or no longer) activated. |
Users Allowed: shows the number of users/computers that can simultaneously run on your Duxbury license.
Max Valid Version: Normally this field displays your current program version, but it also indicates if your license qualifies for a newer version than the one you are currently running. (In this case, use Check for Updates... from your Duxbury program top menu to download the newer version.) This field may also contain other data useful to Duxbury Support.
Features Match: For DBT, this field shows whether the Feature Set from your installation remains intact. The results are either OK or Invalid Feature Set accordingly. For NimPro diagnostics, this field reports the DBT State for the accompanying DBT. (NimPro only works with DBT installed.)
After the test results there are two more useful functions provided for you.
View Log: This command button opens
Send Email: If you have an email program installed, this button creates an email message addressed to Duxbury with the activation log file attached. It opens the email program window where you then need to Send the message as usual.