nld
(The initial translation table for a translation is determined by the selected template, and may be changed using the Document / Translation Tables menu. Using those menus does not involve explicit use of the table designator. However, in cases where it is necessary to switch to a different translation table partway through a file, the designator for the table being switched to is required; see the general description of the [lnb~...] command for further details.)
The Dutch tables support print-to-braille translation of Dutch-language literary text in grade 2 (contracted) or grade 1 (uncontracted) braille.
Braille-to-print translation is supported for this language. However Braille-to-print translation may not be perfect, therefore errors could occur. If you find any errors, or have suggestions, please send both the *.dxb and *.dxp files along with an explanation to: languages@duxsys.com (Please be sure to include sample files).
There are no special requirements or limitations.
No secondary languages are supported. However, it is possible to switch to any of the available translation tables listed in DBT. (See the [lnb~...] code below.)
No technical codes are supported.
However, it is possible to switch to any of the available translation tables listed in DBT (see the [lnb~...]code below), many of which do support various technical codes, such as for mathematics or computer notation, or which support “unified” treatment of technical notation as well as literary text in the base language associated with the table.
The following DBT translation codes are available when using the Dutch table. Any other translation codes used will be ignored, or indeed may cause unexpected results. If using an alternative translation table, i.e when switching to another base language table by means of the[lnb~...] code, please refer to the relevant topic and available codes for that table.
[/] -- ignored
[ab] is equivalent to [g2]
[cz]
[fte~b]
[fte~i]
[fts~b]
[fts~i]
[g1] switches to "grade 1" (uncontracted) braille.
[g1l] switches to "grade 1" (uncontracted) braille and "locks" that setting.
[g1u] undoes the "locking" effect of a prior [g1l], while leaving the contraction grade as "grade 1" (uncontracted) braille.
[g2] switches to "grade 2" (contracted) braille (which is the normal mode for this table).
[g2l] switches to "grade 2" (contracted) braille and "locks" that setting.
[g2u] undoes the "locking" effect of a prior [g2l], while leaving the contraction grade as "grade 2" (contracted) braille.
[in] is equivalent to [g1]
[lnb]
[lnb~...] (for switching to another base [primary] language table)
[lng...] -- ignored.
[tx]
The table is designed to work with the following groups of characters:
All ASCII printable characters
Accented characters and punctuation marks typical of French, German, Italian, and Spanish
British pound sign (£)
The above is a general guide only (see "General Notes" section at the beginning of this document).
These tables are based upon the information given for Dutch in "World Braille Usage," a joint publication of UNESCO and the National Library Service for the Blind and Physically Handicapped, Washington, D.C. (1990).
Uncontracted Dutch tables were originally developed in September 1997 by Duxbury Systems, Inc. Mr. Marten Post Uiterweer has provided feedback used in subsequent revisions of those tables. In March 2004, at the request of Dr. John Gardner of ViewPlus Technologies, Suzanne M. van den Bercken provided information on the few contractions commonly used in Dutch braille, which gave rise to these contracted tables.
(Documentation reviewed: July 2010.)